FAQs

Question, problem		Answer
Pressure points		Check that the inner boot is positioned properly on the heel, Smooth out the cushion filling over the pressure point and reposition. Do not tighten straps overly hard.
The vacuum cushion is hard and  cannot be shaped		Pull the valve ring upwards. Move it sideways to allow the flow of air. The cushion becomes soft
The sole cannot be attached		Briefly (and carefully) bend the sole so that the walking surface of the sole is gently curved outwards. Reinsert the sole.
The Achilles pad cannot be inserted		Inserting the Achilles pad needs some practice. Try once again, holding the pad as deeply as possible and pressing the ends in the fissure given.
The joint should be unrestricted		Firstly remove the rear angle adapter and set the angle adapter to ROM 10°-0°10°. Then pull one side on the rubber of the front adapter and remove it without substitution. The VACOped joint should now be mobile.